Hot Stamping Machine for WPC Door Frame
Delivery term:The date of payment from buyers deliver within days-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Jiangsu
-
Validity to:
Long-term effective
-
Last update:
2018-12-05 17:48
-
Browse the number:
347
+
- Contactaixin:
Contactaixin:
ydqgjx(Mr.)
- Email: telephone: phone:
-
Area:
Jiangsu
Address:No.100, East of Chunsun Road, Xishan District, Wuxi City, Jiangsu Province
-
Website:
http://www.cnyudajixie.com/ http://ydqgjx.interview-training-uk.com/
+
Introduction
WPC DOORS DECORATED BY HOT STAMPING MACHINE
DECORATION EQUIPMENT FOR WPC DOORS,DOOR FRAME AND DOOR PROFILE | ||||||
No. |
DESCRIPTION OF MACHINE |
MODEL OF MACHINE |
QTY (SET) |
PRICE (RMB) |
PRICE (USD) 1USD=6.3RMB |
PERFORMANCE |
1 |
WIDE DOUBLE-BELT SANDING MACHINE |
BSG2210 |
1 |
USED FOR SANDING DOORS/BOARDS SMOOTHLY |
||
2 |
ENGRAVING MACHINE FOR DOOR |
M25-X |
1 |
ENGRAVING PATTERNS ON THE DOORS |
||
3 |
LOW TEMP.&HIGH TEMP. HOT STAMPING MACHINE FOR PVC&WPC DOOR |
TY1000 |
1 |
DECORATING PATTERNS ON THE WPC DOORS AND PVC DOORS BY DIFFERENT TEMPERATURE |
||
4 |
HOT STAMPING MACHINE FOR DOOR FRAME |
OTR5300 |
1 |
DECORATING PATTERNS ON THE DOOR FRAMES |
||
5 |
HOT STAMPING MACHINE FOR DOOR PROFILE |
OTR6100 |
1 |
DECORATING PATTERNS ON THE DOOR PROFILE |
||
6 |
FULLY-AUTOMATIC SLITTING MACHINE |
QF1300 |
1 |
SLITTING FOIL INTO NEEDED SIZES |
||
7 |
DICING SAW FOR DOOR PROFILE |
MJ6132B |
1 |
USED FOR CUTTING DOORS AND DOOR FRAME WITH 45 OR 90 ANGLES TO INSERT GLASS. |
||
8 |
VERTICAL MILLING MACHINE |
MX5117B |
1 |
MILLING CHANNELS FOR BOTH ENDS OF DOOR |
||
9 |
MANUAL POLISHING MACHINE |
S1B-FF-93X185 |
1 |
REPOLISH FOR SMALL PART |
||
10 |
ELECTRICAL MILLING MACHINE |
M1R-FF02-12 |
1 |
TO OPEN GROOVE FOR BOTH ENDS OF DOORS |
||
11 |
MANUAL TRIMMER |
M1P-FF02-6 |
1 |
OPEN THE LOCKHOLE FOR SIDE OF DOOR(NEED TO MAKE SPECIAL DIE) |
||
The above equipment is related to all the decoration equipment decorated by hot stamping methods and its installation machines. Just for door frame, we need to know shapes of them, then we can confirm if just need OTR5300 or OTR6100 or other models, thanks. | ||||||
TOTAL AMOUNT |
1. BSG2210TYPE WIDE DOUBLT-BELT SANDING MACHINE
Performance:
◎ It is used to sanding the surface of WPC doors into even and smooth just because the extruded door is not very even and smooth, so it’s better to sanding then decorating, that will be better.
Technical Parameters of Sanding Machine
1000mm |
|
Thickness of sheet |
3~110mm |
Sanding speed |
18-12m/s |
Speed of conveying belt |
6-30m/min |
Power of elevating motor |
0.37kw |
Power of conveying motor |
1.5kw |
Total power of motors |
35.72kw |
Working pressure |
0.4-0.8Mpa |
Consumption of compressed air |
0.78m/min |
Air volume of Exhaust blower |
3000m3/h |
Visual size(L*W*H) |
2100*1700*2200mm |
Net weight of machine |
≈3000kg |
2. M25-X TYPE CNC ENGRAVING MACHINE
Performance and technical parameter:
◎ It is used to engraving designs on the WPC doors, screen, article windows to get empaistic patterns;
◎ It adopts vacuum absorption table, water cooling by 5.5kw water ring pump;
◎ The rotating speed of spindle motor is 24000r/min;
◎ The X,Y,Z shaft adopts imported linear guideway, which can make sure the precision of machine and also heavy loading;
◎ Max engraving size is 1300x2500x190mm;
◎ the diameter of blade is 3.175mm, 4mm, 6mm, and 12.7mm;
◎ The repeated positioning accuracy is <0.05mm/300mm;
◎ The power supply is AC380V±10%(50Hz).
Photo of engraving machine
3. TY1000 TYPE HOT STAMPING MACHINE FOR WPC DOORS&PVC HOLLOW DOORS
Performance:
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming doors by high temperature (130-180℃), which make plastic doors like true wood; but also can do low temperature (60-80℃) hot stamping for PVC hollow doors with thin wall-thickness;
◎ It can decorating top surface and side surface of doors at one time;
◎ The max decorating width is 1000mm.
Technical parameter of TY1000
Effective thermo stamping width |
1000mm |
Thermo stamping speed |
1~10m/min |
Thickness of sheet |
2~70mm |
Driver power |
3kw |
Heating power |
27kw |
Total power |
33.5kw |
Visual size(L*W*H) |
9500*2150*1800mm |
flow chart of TY1000
4. OTR5300 Type hot stamping machine for WPC door frame
Performance:
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming door frame, which is matching with WPC doors together;
◎ Normally the max shapes of door frame is 5-surfaces, so we designed this model of hot stamping machine to decorating 5 surfaces at one time; if clients have special requirement, we also can make per clients’ products and special requirement;
◎ The max decorating width is 300mm.
Technical parameter of OTR5300
Effective thermo stamping width |
80~300mm |
Laminating speed |
1~10m/min |
Thickness of sheet |
2~70mm |
Driver power |
1.68kw |
Heating power |
7.6kw |
Total power |
10kw |
Visual size(L*W*H) |
5500*1000*1800mm |
Flow chart of OTR5300
5. OTR6100 Type hot stamping machine for door profile(within 100mm width)
Performance:
◎ It is used to heat transfer printing designs from hot stamping foil(i.e. PET foil) onto WPC/PVC/PVC foaming door profile and profiles for installing glass;
◎ Normally the max shapes of door frame is 6-surfaces, so we designed this model of hot stamping machine to decorating 6 surfaces at one time; if clients have special requirement, we also can make per clients’ products and special requirement;
◎ The max decorating width is 100mm.
technical parameter of OTR6100
Effective stamping width |
100mm |
Thermo stamping speed |
1~10m/min |
Thickness of sheet |
5~100mm |
Driver power |
0.75kw |
Heating power |
7.8kw |
Total power |
9.5kw |
Visual size(L*W*H) |
7200*750*2000mm |
the flow chart of OTR6100
6. MJ6132B TYPE DICING SAW FOR DOOR PROFILE
Performance:
◎ It is used to cutting door profiles;
◎ It adopts electric motor to elevating the position of saw and the saw can be adjusted per 45 degree.
Technical parameters
Max cutting length |
3120mm |
Max cutting thickness |
78mm |
Size of main saw |
Ø 305x30mm |
Size of saw for channel |
Ø 120x20mm |
Rotate speed of main saw shaft |
4000/5000 r/min |
Rotate speed of saw for channel |
9000r/in |
Power of motor for main saw |
5.5kw |
Power of motor for channel saw |
0.75kw |
Photo of Saw Cutting Machine
7. QF1300 model Automatic Film Slitting Machine
Performance:
◎ The standard width of hot stamping foil is 1250mm, but the doors and profiles have different width, so our slitting machine is used to slitting hot stamping foil into demanded width per profiles’ widths.
Technical parameters
|
Max working width of foils |
1300mm |
Max diameter of foil rolls |
600mm |
|
Inner diameter of card core |
76mm |
|
Min slitting width |
15~20mm |
|
Max slitting thickness |
0.2mm |
|
Slitting speed |
0-120m/min |
|
Motor power |
3kw AC electromagnetic timing motor |
|
Air fan power |
370W/380V |
|
Power supply |
220V 50Hz |
|
Magnetic powder brake |
DZF kgfm/5 |
|
Divergence correction accuracy |
2mm |
|
Slitting tools of round blade |
10sets |
|
Slitting tools of vertical blade |
12sets |
|
Net weight |
1800kg |
|
Visual size(L*W*H) |
2380*1540*1370mm |
8. Vertical Milling Machine MX5117B
Performance:
◎ It is used to cutting vertical of doors;
Technical parameters
Max sliding length |
870mm |
|
Max milling thickness |
120mm |
|
Spindle diameter |
Ø 35mm |
|
Spindle speed |
8000r/min |
|
Installation power |
4.0kw |
9. Manual Polishing Machine S1B-FF-93X185
Performance: |
Technical Parameter |
|
Rated voltage/frequency |
220V/50Hz |
|
Rated power input |
160w |
|
Orbits frequency |
10000r/min |
|
Pad sizes |
90*185mm |
|
Net weight |
1.7kgs |
10. Electrical Milling Machine M1R-FF02-12
Performance: It is used to cutting vertical of doors; |
Rated voltage/frequency |
220V/50Hz |
Rated power input |
1650w |
|
No-load speed |
22000r/min |
|
Max milling cutter diameter |
Ø12.7mm |
|
Net weight |
6kgs |
11. Manual Trimmer M1R-FF02-6
Performance: |
Technical parameter: |
|
Rated voltage/frequency |
220V/50Hz |
|
Rated power input |
350w |
|
Rated speed |
30000r/min |
|
Max milling cutter diameter |
Ø6.35mm |
|
Net weight |
1.8kgs |
Noted: above machine list, they are offered by our domestic clients, who works in WPC door sets factory as workshop manager. For item 1, most of domestic WPC door sets factories use it, but if you can make WPC doors with flat surface, then no need. For item 2,7,8,9,10,11 used for make door styles&installation.
http://www.cnyudajixie.com/