The carbonated beverage filling machine is designed and manufactured based on the principle of isobaric filling. The filling valve adopts isobaric mechanical valve, which enables fast and sensitive filling and high filling level accuracy. The centering guide uses guide rod centering and unique bottle mouth clamping technology to ensure accurate sealing between the bottle mouth and filling valve and reduce material leakage from the bottle mouth. The main transmission adopts gear transmission, which is an open combination transmission with high efficiency, low noise, long service life, convenient maintenance and sufficient lubrication. The frequency converter is used to control the speed of the machine's main motor, and the machine adopts stepless frequency conversion control. The bottle guidance system is simple in structure and can be quickly and easily changed according to the bottle type. The whole machine adopts bottleneck structure for transportation. The whole machine is automatically controlled by PLC and displays bottle clogging, missing bottle caps and other faults online. Automatically control the materials in the filling cylinder, and the liquid level sensor detects the liquid level to ensure stable liquid level and reliable filling.

The carbonated beverage filling machine contains a rotating bottle cleaning machine, which is mainly used to clean new bottles of beverages, water and other products. The bottles are then sent to the carbonated beverage filling machine for product filling.
The PET bottle enters the equipment from the bottle separation star wheel, clamps the bottle mouth with a clamp and a turning mechanism, turns the bottle mouth downward, rinses and drains the sterile water, and then automatically rotates the PET bottle upward to the exit star wheel. wheel to the filling machine.The main structure of the equipment, the parts in contact with the flushing medium and the external protective cover are all made of high-quality stainless steel; open gear transmission. The new stainless steel clamp has a simple structure and is easy to adjust; the contact area with the bottle mouth is small, effectively avoiding secondary contamination of the bottle mouth. The water inlet pipe of the bottle washing machine is equipped with a pressure gauge, and the bottle washing machine is equipped with a water receiving plate to recycle bottle washing water. In the capping part of the carbonated beverage filling machine, the caps arranged by the capping machine will be screwed onto the bottles of filled products and then sent to the next process by the conveyor chain.

The capping machine drives the rotating disk to rotate through the reducer. Under the action of centrifugal force, the lid leaves the hopper from the hopper outlet. There is a front and back cover separation device at the outlet. When the back cover passes through, the cover will automatically fall into the return pipe, and the back cover will be automatically blown into the hopper by the wind. Only the sun cover can enter the slide smoothly. The photoelectric switch automatically detects the number of caps in the hopper and controls the cap conveyor to ensure high-quality results for the lower caps. When the front cover enters the slide, the paper feed cover can be entered smoothly. In order to prevent accidents, a dial with an anti-return cover is also installed on the slide to ensure that the cover entering the paper feed cover is correct. There is also a pair of photoelectric switches on the slide. If the cover is not detected, the console will stop immediately.